16
Electronic programmer/timer
This oven’s timer is equipped with touch control sensors. Each
registered touch of a sensor is confirmed by a beep. It is advisable to
keep the sensors clean at all times to avoid errors in operation.
Setting the current time
After connection to the mains supply, or re-connection after a power
outage, the display will show ‘Choose time format: 24hr’. Use the
and sensors to change between 24 and 12 hour time display. Press
once the desired format is selected.
•
Use the and sensors to set the number of hours. Press .
•
Use the and sensors to set the time in minutes. Press .
Please note:
•
The time must be set for the oven to work.
•
You can follow the above steps for changing the time. Firstly
though, the oven must be on but not running a function and you
must touch and hold the clock sensor to enter time adjustment.
Setting the minute minder function
The minute minder function can be set at any time whilst a function is
active. The minute minder can be set anywhere from 1 minute to 23
hours and 59 minutes.
•
Press the timer sensor
. The
symbol on the display should
flash and the time display should show ‘00:00’.
•
Set the desired duration of the minute minder using the and
sensors. Touch the timer sensor
and the minute minder will be
set. If a function is active, then you may have to cycle past the
and symbols using the timer sensor .
