manualshive.com logo in svg

CDA sk380 Series, Руководство пользователя, Страница: 28 / 36

Поделиться
Скачать
CDA sk380 Series Скачать руководство пользователя страница 28

28

ADVICE FOR THE INSTALLER

Important

Appliance installation and maintenance must only be carried out by QUALIFIED TECHNICIANS and in 
compliance with the local safety standards.

• Failure to observe this rule will invalidate the warranty.

•  Always disconnect the appliance from the electrical supply before carrying out any maintenance operations or 

repairs.

• The walls surrounding the oven must be made of heat-resistant material. 

• Taking care NOT to lift the oven by the door handle.

The oven can be fitted in standard units, width 90 cm and depth 60 cm. 
Installation requires a compartment as illustrated in figures 16 and 17. 
On the lower side, the oven must lay on a surface that support the oven's weight.

WARNING

When correctly installed, your product meets all safety requirements laid down for this type of 
product category. 
However special care should be taken around the rear or the underneath of  the appliance as these 
areas are not designed or intended to be touched and may contain sharp or rough edges, that may 
cause injury.

Содержание sk380 Series





































Отзывы:

Нет отзывов