CDA PC 16 2 SS, Руководство по эксплуатации для пользователя

Страница: 35 / 40

35
For your safety please read the following information:
– Connection to the mains must be carried out by qualified personnel in accordance with
current regulations.
– The appliance must be connected to the mains checking that the voltage corresponds
to the value given in the rating plate and that the electrical cable sections can withstand
the load specified on the plate.
– The cooker can be connected directly to the mains placing an omnipolar switch with
minimum opening between the contacts of 3 mm between the appliance and the mains.
– The power supply cable must not touch any hot parts and must be positioned so that
it does not exceed 75°C at any point.
– Once the cooker has been installed, the switch or socket must always be accessible.
N.B. For connection to the mains, do not use adapters, reducers or branching
devices as they can cause overheating and burning.
If the installation requires alterations to the domestic electrical system or if the socket and
appliance plug are incompatible, call an expert.
He should also check that the socket cable section is suitable for the power absorbed by
the appliance.
– The connection of the appliance to earth is mandatory.
The manufacturer declines all responsability for any inconvenience resulting
from the none observance of this condition.
Electrical installation
Before carrying out any work on the electrical parts of the appliance, the appli-
ance must first be disconnected from the electrical supply.
IMPORTANT: The cooker must be installed in accordance with the manufacturer’s
instructions.
Incorrect installation, for which the manufacturer accepts no responsibility, may
cause injury to persons, animals or equipment.
IMPORTANT: this cooker must be connected to a suitable double pole control
unit adjacent to the cooker.