CDA HVG95, Руководство по установке, использованию и обслуживанию, Страница: 22 / 36

22
FASTENING THE COOKTOP
Each cooktop is provided with an installation kit including brackets and screws for fas-
tening the cooktop to benches from 30 to 40 mm thick.The kit includes two "
F " type
brackets (for the front of the cooktop), two " R " type brackets (for the rear of the cook-
top) and four self-threading screws " S " (figs. 21, 22a and 22b).
✓
Cut the unit according to the dimensions in fig. 19.
✓
Turn the hob upside down and rest the glass side on a soft surface.
✓
Spread the seal " G " around the edge of the hob (fig. 21).
✓
Fasten the brackets " F " and " R " to the appropriate socket holes, without tightening
the screws " S " for the moment. Make sure that the tabs are mounted correctly, as
shown. Rotate the tabs so that the cooktop can be put into the cutout.
Figure 22b Figure 22a
3 c
m
m
i
n
3 c
m
4 c
m
S
A
R
3 c
m
m
i
n
A
3 c
m
4 c
m
F S
Figure 21
Adhesive side
G
G
✓
Put the cooktop into the cutout and
position it correctly.
✓
Put the brackets " F " and " R " into
place; tooth " A " of the brackets
should go into the hole (Figs. 22a
and 22b).
✓
Tighten screws " S " until the cooktop
is completely secured to the bench.
✓
Using a sharp cutter or trimmer knife,
trim the excess sealing material
around the edge of the cooktop.
Take care not to damage the work-
bench.
REAR FIXING BRACKETS FRONT FIXING BRACKETS