CDA HG9321SS, Инструкция по установке, эксплуатации и обслуживанию, Страница: 12 / 28

12
Gas supply requirements
Important Note
This appliance is supplied for use on NATURAL GAS or LPG (check the gas regulation label attached
on the appliance).
•
Appliances supplied for use on NATURAL GAS: they are adjusted for this gas only and cannot
be used on any other gas (LPG) without modification. The appliances are manufactured for
conversion to LPG.
• Appliances supplied for use on LPG: they are adjusted for this gas only and cannot be used
on any other gas (NATURAL GAS) without modification. The appliances are manufactured for
conversion to NATURAL GAS.
If the NATURAL GAS/LPG conversion kit is not supplied with the appliance this kit can be purchased
by contacting the After-Sales Service.
Installation and Service Regulations (United Kingdom Only)
This appliance must be installed and serviced only by a suitably qualified and registered person,
and in accordance with the current editions of the following standards and regulations or other
locally applicable regulations:
•
Gas Safety (Installation and Use) Regulations
• Building Regulations
• British Standards
• Regulations for Electrical Installation
Installation and service of any gas product must be made by a suitably qualified person competent
on the type of product being installed or serviced and holding a valid certificate of competence
for the work being carried out. Currently the proof of competence is the Accredited Certification
Scheme (ACS) or S/NVQ that has been aligned to the ACS.
It is also a requirement that all businesses or self employed installers are members of a class of
person approved by the Health and Safety Executive.
Failure to install the appliance correctly could invalidate any manufacturers warranty and lead to
prosecution under the above quoted regulation.