CDA HC9606FR, Установка - Использование - Обслуживание

Страница: 12 / 28

12
until the relevant zone’s LED is flashing. These LEDs are set out
in a similar manner to the zones:
• Set the number of minutes using the power level slider (4). The
slider should be used with a swiping motion from left to right using
the complete fingertip. When you have reached the edge of the
slider, lift your finger and start again from left to right. You can also
touch the slider at any point to raise the number of minutes.
• Once the time has elapsed the hob will emit an acoustic signal and
the zone will cease operation. To cancel the acoustic signal simply
press any sensor field.
To cancel the timer
• Simply select the zone being timed (indicated by the LEDs as per
the above) using the timer sensor (10) and then use the power
level slider (4) to return the number of minutes to “0”. The slider
should be used with a swiping motion from right to left using the
complete fingertip. When you have reached the edge of the slider,
lift your finger and start again from right to left. You can also touch
the slider at the low level indicator instead of swiping.
To set the minute minder
• First switch on the hob if necessary and touch the timer sensor (10)
once. This will activate the minute minder.
• Next, set the desired number of minutes using the power level
Left zone LED
Central left zone LED
Central right zone LED
Right zone LED