CDA HC3616FR, Инструкция по установке, эксплуатации и обслуживанию, Страница: 8 / 24

8
Auto-heat Function
Both zones are equipped with an auto-heat function, which reduces
the warming up time for the zone.
To activate the auto-heat function on a zone
• Switch the hob on, if not already so, activate zone control by
touching the relevant zone's selector and then touch the minus
setting selector. The zone display will show power level 9 along
with a flashing decimal point. Then, and within 10 seconds, touch
the minus setting selector and set the desired power level. The
zone's display will alternate between the power level and the letter
'A' to confirm that the auto-heat function is active.
To deactivate the auto-heat function
• Simply touch the desired zone's selector, if zone adjustment is not
already active, and then adjust the zone power level to '0'.
Each power level has a limited time for which the auto-heat function
can be used. A table showing these times is shown below.
Please note:
The auto-heat function is not compatible with power
level 9.
1
1 Zone Power Level
Maximum
Operating Time
(minutes)
2
3
4 5 6 7
8 9
2.4 4.4 5.2 6.2 1 2.4 2.4 - -