CDA FWC881BL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 28

20
Fitting the plinth
We recommend the help of
at least one other individual
throughout this process.
Protect the area beneath
the door and plinth with
several clean towels or similar
protective means. Do not tilt
the appliance further than 90°
during this process. Allow the
cooler to settle for at least 8
hours before switching on after
tilting.
1. Unscrew and remove the four
screws that are used to fix the
plinth and bottom bracket (Fig.
13).
2. Insert the tabs on the glass
fronted plinth section into the
top slots of the metal plinth, as
per part 1 of Fig. 14. Manoeuvre
the plinth so that the holes
in the inner lip of the glass
fronted plinth section are level
with the holes in the metal
plinth (2 in Fig, 14). Re-fit the
screws (3 in Fig. 14).
Fig. 14
1
2
3
1
2
Fig. 13
Fig. 12