background image

Important

The  CDA  Group  Ltd  cannot  be  held  responsible  for  injuries  or  losses  caused  by  incorrect  use  or  installation  of  this 
product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect 
installation or misuse of the appliance.

This  appliance  is  not  designed  to  be  used  by  people  (including  children)  with  reduced  physical,  sensorial  or  mental 
capacity, or who lack experience or knowledge about it, unless they have had supervision or instructions on how to use 
the appliance by someone who is responsible for their safety.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably  
qualified personnel.

Appliance information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a 
fault with your appliance and to register your appliance for guarantee purposes.

  Appliance Model 

  Serial Number 

CE Declarations of Conformity:

This  appliance  has  been  designed,  constructed  and  marketed  in  compliance  with  safety  requirements  of  EEC  Directive 
2006/95/EEC (Low voltage) and requirements of EMC Directive 2004/108/EEC.

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including 
Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with 
food conform to EEC/89/109.4

IMPORTANT  INFORMATION  FOR  CORRECT  DISPOSAL  OF  THE  PRODUCT  IN  ACCORDANCE  WITH  EC 
DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local 
authority differentiated waste collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health 
deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings 
in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked 
with a crossed-out wheeled dustbin.

Содержание FW281













Отзывы: