4
Control Panel
Switching the fridge on and off
To switch on the fridge for the first time, press and hold the On/Off key (A) for three seconds. The fridge will beep twice, and
will run at the factory preset temperature of 5
°
. To switch the fridge off, press and hold the On/Off key for three seconds.
Setting the temperature
Press the increase or decrease temperature keys (B & C) to select the required temperature between 2
°
and 8
°
. Once the
required temperature is shown on the display, the temperature will set after five seconds’ delay and the fridge will beep twice to
confirm the setting.
The fridge will take some time to adjust to the new settings. This will depend on the difference between the old and new settings,
the ambient temperature, the amount of food in the fridge and the number of times the door is opened.
High humidity function
The fridge is equipped with a high humidity function which can prolong the life of some foods. To switch on the high humidity
function, press and hold the high humidity key for three seconds. The high humidity indicator will show on the display and the
fridge will beep twice to confirm the setting. To switch the high humidity function off, press and hold the high humidity key for
three seconds. The high humidity indicator on the display will switch off and the fridge will beep twice to confirm the setting.
Please note:
The temperature will show on the display for 30 seconds after the door has been opened, or a key has been pressed on the
control panel before switching off automatically. To switch the display on, press any key.
In the event of a power failure, the fridge temperature settings will be restored to the programmed levels when the power returns.
Over temperature alarm
The fridge is equipped with an over temperature alarm to warn when the termperature in the fridge has been over 15° for
six hours or more. The fridge will beep ten times every thirty minutes until the fridge temperature is below 10°, and the fault
code E9 will show on the display. Press any key to switch the alarm off. E9 will continue to show on the display until the fault is
resolved.
D
A
B
C
A On/Off key
B Increase temperature key
C Decrease temperature key
D High humidity function key
E High humidity indicator
fig. 1
E
Содержание FF820
Страница 11: ...11...