CDA EZA60BL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 20

6
Using your Extractor
For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking.
Control Panel
A - Power off button B - Speed level buttons C - Light button
To switch the extractor light on or off
• Press the light button (C).
To switch on the extractor or to change the speed at any time
when the extractor is running
• Press the relevant speed button (B) for the first, second, third or
fourth speed level as required.
• Press and hold any speed setting for approximately 2 seconds
to activate a 10 minute timer for that speed. The selected speed
should flash. Touch the same sensor to cancel the timer.
To switch the extractor off
• Press the power off button (A).
7
A B C