CDA EVS90BL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 20

9
To remove the grease filters follow these steps:
1. Open the cover panel by pulling down on the LED indicator side.
The panel will lower as far as the hydraulic arms permit.
2. Pull down the handle on each grease filter. It will release at the
handle side. Then, lower the grease filter to remove it completely.
Please note: Releasing the grease filters, when the extractor is
installed, could cause them to fall. Take care and ensure you remove
them safely. Protect any surfaces below accordingly.
To replace the grease filters, repeat the above steps in reverse.
This appliance is fitted with energy saving LED lighting that has a
considerably longer life expectancy than traditional filament bulbs.
These are not user-replaceable. In the unlikely event of a failure
please contact CDA Customer Care using the details on page 17.
The lighting is designed for aesthetic purposes and not for general
room, nor down-light, illumination. Extended use of the lights can
reduce their life span.