CDA EVG Extractor, Руководство по установке, использованию и обслуживанию

Страница: 5 / 12

Changing the Light
IMPORTANT: DO NOT PERFORM MAINTENANCE OR CLEANING OF THE
EXTRACTOR WITHOUT FIRST SWITCHING OFF THE ELECTRICITY SUPPLY.
DO NOT CHANGE THE LIGHT BULB IMMEDIATELY AFTER USE AS THE
BULB WILL BE HOT. ALLOW IT TO COOL BEFORE REMOVING IT.
Carefully prise open the lamp assembly cover (D) using a small, flat-bladed screw-
driver and remove the old bulb (C). Refit the new bulb taking care not to touch the
glass of the bulb (Fingerprints will lead to premature failure of the bulb)
Do not touch bulbs or adjacent areas during or straight after prolonged use of
the lights.
The light is designed for use during cooking and not for general room illumination.
Extended use of the light can reduce the life span of the bulb.
Bulb replacement is not covered by the guarantee.
Only use bulbs recommended for your extractor. Do not fit bulbs of a higher
power rating.
Bulbs of a lower power rating may be adequate for use, generally last longer and
use less energy.
4
C
D
Fig. 5