13
2) Before making a cut-out in the
kitchen cabinets or worktop,
ensure that there are no structural
(or other) obstructions that would
hinder installation. Ensure that the
cabinet dimensions are sufficient to
accommodate the extractor, allowing
for the specified clearance between
the final installed positions of the
extractor and the hob.
3) Before installation remove the transit
pieces shown in fig. 4, 5, & 6.
4) Make a rectangular cut-out in the
worktop to accommodate the
extractor.
The dimensions of the cut-out should
be:-
edd61 - 490 x 100mm
edd91 - 790 x 100mm
5) If your extractor has been supplied
with the motor unit already mounted
on the main body, this needs to be
dismantled to enable the extractor
to be inserted through the worktop
cut-out.
Fig. 4
Fig. 6
Fig. 5
