CDA CPXI9, Руководство по установке, использованию и обслуживанию, Страница: 2 / 4

MAINS ELECTRICITY CONNECTION:
THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT
PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWITCHED FUSED SPUR OUTLET
AND PROTECTED BY A 3A FUSE.
We recommend that the appliance is connected by a qualified electrician, who is a member of the
N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.
The wires in the mains lead of this appliance are coloured in accordance with the following code:
Blue = Neutral, Brown = Live.
As the colours of the wires in the mains lead for the appliance, may not correspond with the
coloured markings identifying the terminals connecting to the fused spur, proceed as follows:
1. The wire which is coloured blue must be connected to the
terminal marked N (Neutral), or coloured Black.
2. The wire which is coloured brown must be connected to the
terminal marked L (Live), or coloured Red.
Note: Use a 3A Fuse
Assembly and electrical connection should be carried out by specialised personnel.
When installing this product we recommend you seek the help of another individual
The manufacturer declares that this product meets all the essential requirements for low voltage
electrical material set out in European directive 2006/95/EEC of 12 December 2006 and for
electromagnetic compatibility as required by European directive 2004/108/EEC of 15 December
2004.
Use
For optimal performance, the extractor
should be switched on prior to cooking and
left running for approximately 15 minutes
after the end of cooking.
Five button control panel
This panel is situated on the front of the
extractor and includes:
On indicator for the light (A)
On/off button for the light (B)
Off button for the motor (C)
Speed 1, 2 and 3 switches for the motor (D)
Maintenance
IMPORTANT: Before any type of
maintenance, make sure that the power
to the extractor is switched off.
Cleaning
Clean the exterior of the extractor with a
mild liquid detergent and avoid the use of
abrasive cleaning products.
Cleaning the grease filter
Depending on use, and at least once a
month the grease filter should be
disassembled and cleaned with hot soapy
water. The filter can also be washed in a
dishwasher, and should be placed in an
upright position to prevent damage from
other items in the dishwasher. After rinsing
and drying, replace the filter.
Please note: Cleaning the filter in the
dishwasher may lead to discolouration. This
is purely cosmetic and does not affect in any
way the lifespan of the filter.