Problems
Why doesn’t the washing machine drain or spin-dry?
s
If this failure is detected, F02 will appear on the display.
The reasons for the F02 indicator may be the following:
s
s
The washing machine drain pump is blocked, building drainage pipes are blocked, or incorrect pump electrical
connection.
s
Solution: if the pump is blocked, gain access to it as described on page 19, cleaning the filter.
Why doesn’t the washing machine spin-dry?
This may be due to the following:
s
If this failure is detected, C03 will appear on the display.
s
This may be due to an uneven distribution of clothes in the drum and may cause an excessive level of vibrations.
s
The solution is to select a spin-drying programme.
Why can’t I see any water in the drum during the wash?
s
This is due to the fact that the washing machine is provided with a system which is able to adapt to the load and type
of fabrics, adjusting the levels of water and energy used, in order to preserve the environment. So, although the water
level you can see through the hatch may look low, there is no cause for concern as washing and rinsing efficiency will
still be optimal.
Why is there still some water in the dispenser?
s
This may be because the dispenser needs cleaning. This simple operation is described in Maintaining and cleaning
the
appliance.
Why can’t I open the porthole door immediately after the wash has finished?
s
Washing machines today are provided with safety systems for users. One of these is that the washing machine
cannot be opened until it is certain that the drum is quite still. This is why the hatch cannot be opened for 2 minutes.
Other indications
s
The washing machine can detect other indications. When this happens a number of other indicators appear on the
display: F05, F06..., F10. If this happens, call CDA Customer Care.
21
