28
the event of a fault.
Failure Code
Probable failure
The process to be done
E1
• Drainage error, water is
not fully drained within
6 minutes
• Clean pump filter.
• Check drain hose installation
E2
• Lock - error.
• Shut the door properly.
E4
• Water level not reached
after 7 minutes. at the
latest.
• Drain hose is
self-syphoning.
Unplug the machine, close the water tap and
contact CDA Customer Care.
E8
• Water protective
level - error.
Unplug the machine, close the water tap and
contact CDA Customer Care.
F3
• Temperature sensor
- error
F4
• Heating error.
Unplug the machine, close the water tap and
contact CDA Customer Care.
F7
• Motor - error.
Unplug the machine, close the water tap and
contact CDA Customer Care.
FA
FC0/FC1
/FC2
Water level sensor error.
Unplug the machine, close the water tap and
contact CDA Customer Care.
Unplug the machine, close the water tap and
contact CDA Customer Care.
• Abnormal
communication error.
End
End of wash cycle.
Not a machine fault.
UNb
After last rinse cycle
finishes laundry not
completely balanced.
• Check and balance laundry load in the drum.
Reduce the load.
Unplug the machine, close the water tap and
contact CDA Customer Care.
cLrF
Too many detergent suds
(over-foaming) detected.
Run an extra rinse cycle (more if necessary).
Once cleared use less, or a different, detergent.
