CDA ci325, Руководство по установке, использованию и обслуживанию

Страница: 26 / 36

26
Troubleshooting
All repairs which must be done on the machine should only be
performed by authorised service agents. When a repairs is required
for your machine or you are unable to eliminate the failure with the
help of the information given below:
• Unplug the machine.
• Close the water tap.
• Contact CDA Customer Care.
Fault Probable cause Methods of elimination
The machine will not
start. It is unplugged. Insert the plug into the socket.
The fuse is damaged. Replace the fuse.
There is a fault with the power
supply. Check the power supply.
The washer door is not properly
closed. Close the washer door.
“Start / Pause” button has not
been pressed. Press the “Start / Pause” button.
The machine does
not filll with water. Start / Pause” button has not
been pressed. Press the “Start / Pause” button.
Water tap is not turned on. Turn on the water tap.
Water pressure too low. Check water pressure.
The inlet hose is kinked. Check the inlet hose.
Water supply failure. Check the water supply.
Programme knob not set
correctly. Set the the programme knob correctly.
Washer door not properly closed Close the washer door properly.
Inlet hose filter is blocked. Unblock the inlet hose filter.
The machine is
draining while being
filled. The height of drain hose is below
80cm. Install drain hose at specified height of
80-100cm.
The drain hose is in water. Ensure the drain hose end is not
immersed in water.