
34
Fault
Probable cause
Methods of elimination
The machine will not
start.
It is unplugged.
Insert the plug into the socket.
The fuse is damaged.
Replace the fuse.
There is a fault with the power
supply.
Check the power supply.
Start/pause button has not been
pressed.
Press the start/pause button.
The programme knob is in O (off)
status.
Bring the programme knob on the desired
status.
The door is not shut properly.
Shut the door properly.
Your machine does
not receive water.
Water tap is closed.
Open water tap.
The water inlet hose may be
bent.
Check the water inlet hose.
The water inlet hose is
obstructed.
Clean the filters of water inlet hose. (*)
The valve inlet filter is obstructed.
Clean the valve inlet filters. (*)
The door is not shut properly.
Shut the door properly.
Your machine is not
draining water.
The drain hose is obstructed or
bent.
Check the drain hose.
The pump filter is obstructed.
Clean the pump filter. (*)
The washing was not evenly
loaded.
Remove the washload and reload the
garments evenly
Your machine is
vibrating.
The transit bolts have not been
removed.
Adjust the feet. (**)
The washload is small.
Remove the transit bolts (**)
There is a small amount of
clothes in the device.
This is not indicative of a fault.
The washing machine is
overloaded, or badly loaded.
Do not exceed the load capacity, and
ensure the clothes are loaded evenly.
The washing machine is leaning
on a solid object.
Ensure the machine is installed apart from
other objects.
(*)SeeCare and maintenance on page 22.
(**)See Installation on page 28.