CDA CDI6371, Использование и обслуживание

Страница: 31 / 36

31
There is a template supplied in the bag of fixings with detailed dia-
grams on fitting the appliance. Figures 18 and 19
on page 32 show the
recommended installations of our dishwashers. The set-ups in these
figures should be mimicked wherever possible to help to ensure
the best performance of the appliance.
Please carry out the below
checks/measures before, during and after installation.
Drain hose
• This can be connected to a water drain or to a sink outlet spigot.
Where the hose is to be connected to a spigot, ensure that the
spigot is cut/opened (if required) before attaching the hose. A cir-
clip can be used to secure this connection.
Observe the 150mm
minimum height distance between the spigot and drain hose
support as per fig. 19.
• The drain hose support (fig. 20) must be secured at a minimum of
60cm and a maximum of 110cm from the floor and must be higher
than the sink waste.
• Should be no longer than 4m in order to ensure good perfor-
mance.
• Must be free from kinks, debris or damage. It is important that
this is checked before and after installation.
Inlet hose
• This must be free from kinks, debris or damage . This must be
checked before and after installation.
• Should have a bend radius of 200mm minimum to ensure the
proper flow of water to the appliance.
• Ensure the supply to the hose (water valve) is turned on.