8
Installation
Remove the top cover (E) and vent outlet (M), as shown in
figure 15.
Using the provided template mark the positions of the
four fixing holes on the wall, taking care to ensure that
the bottom of the extractor is at least the same or greater
than the clearance distance needed between the hob and
extractor.
The wall plugs used must be suitable for the type of wall
the extractor is to be fixed to. Insert the four plugs and fix
two screws (K) into the upper plugs, leaving approx 5mm
protruding.
Carefully lift the extractor and mount it on the two screws
and secure them tightly.
Fig. 16
Fig. 15
Fig. 17
