3
Mobile Industrial Stand Fan
User Manual
1. Remove the parts from the box.
2. Place the fan head (motor and guard assembly) on a flat level surface with motor on the top side.
3. Assemble two angled legs to one upright with bolt and nut through lower hole as shown in Figure 1. Make
sure the handle and the leg with a hole through the side are facing the same direction. This will ensure that the
wheels and handle will be to the rear of the assembly. Repeat these steps for the other leg assembly.
4. Secure assemblies together with one cross-member as shown in Figure 2. Place cross-member on front side
of assemblies and secure each with a nut and bolt through the top hole in the assemblies. Make certain that
both handles are facing away from the cross-member.
5. As shown in Figure 3, align a double angled cross-member at the base of one leg angle. Align a straight cross
member to the front leg assembly with a bolt and through the cross member, the leg assembly, and the double
angled cross-member. Secure with nut. Repeat at rear and on both sides of the opposite leg.
6. Place rubber flanges between fan head and mounting frame. Secure fan head to assemble with tilting knobs.
(See Figure 4)
7. Attach wheels to frame with bolts and nuts and tighten. (See Figure 5)
2
Assembly Instructions
