14
REVEX
3PH from 120A to 210A
User’s manual
Identification and Order Code
5.1 Identification of the unit
Caution:
Before to install, make sure that the Thyristor unit have not damages. If the product
has a fault, please contact the dealer from which you purchased the product.
The identification label give all the information regarding the factory settings of the Thyristor unit, this label is
on the unit, like represented in figure.
Verify that the product is the same thing as ordered.
5
with display
Option code:
0/4/5/6
on digit 12
without display
Option code:
1/2/3/7
on digit 12
