CCV Mobile Premium, Руководство пользователя

Страница: 18 / 32

Power
Before you connect the terminal power pack to an electrical outlet, check that the on/off power switch
on the terminal is off. If the terminal does not have an on/off switch, check that the power cable
connector is removed from the terminals´s power port. Or, when connecting the terminal to a power
pack, always connect the plug of the power pack to an electrical wall outlet first. Then connect the
power cable to the terminals´s power port. The power pack is rated as follows: Input Voltage 100 - 240
VAC 50/ 60 Hz (0,2 A max.) and output voltage 5V DC, 1,0 A.
Do not use the adapter in a high moisture enviroment. Never touch the adapter when your hands or
feet are wet.
Allow adequate ventilation around the adapter. Avoid locations with restricted airflow.
Connect the adapter to a proper source. The voltage and grounding requirements are found on the
product case and/ or packaging.
Do not use the adapter if the cord is damaged.
Do not attempt to service the adapter. There are no serviceable parts inside. Replace the unit if it is
damaged or exposed to excess moisture.
Battery
The battery pack must be charged at least 6 hours before you start first work with the terminal. Non-
observance can lead to faults.
Do not discharge the battery pack less 10% of the nominal capacity (deep-discharge) as the battery life
time is otherwise considerably reduced.
Damaged battery packs must be changed immediately and disposed of in an environentally proper man-
ner. Do not throw them into the domestic waste or short-circuit them.
CAUTION: In case of incorrect handling, there is a risk of explosion and fire!
At the end of service lives, dispose of the terminal and storage battery pack in an environmentally pro-
per manner.
Disconnecting power
Disconnecting power during a transaction may cause transaction data files that are not yet stored in
terminal memory to be lost. Never remove the battery pack from the terminal if it is in the process of
performing a payment or other transaction („Please wait…“). If this message appears for a longer peri-
od of time, please contact your network provider.
Safety notes
Page 18