Manual CCV IM30
Rev.07
8 / 25
© CCV GmbH - Diese Unterlage darf ohne unsere Zustimmung nicht vervielfältigt oder weitergegeben werden.
This document must not be copied or distributed without our approval.
4.5
SAM/ SIM
Unscrew the SAM card module and then remove it by
prying at the notch set to its side. On the main body of
the CCV IM30, there are 2 micro-SIM sized SAM card
slots. Open the mount and insert the card into the slot
with the clipped corner of the card to the upper right,
then lock the mount with the card inside.
On the SAM card module there is a micro-SIM sized
card slot. Insert the SIM card with the clipped corner
facing inwards and to the left.
To the right, there are two slots for two additional SAM
cards (see illustration: centre: SAM4, right: SAM3).
4.6
Buttons
The terminal does have two buttons on the back. One
for service and one to reset the terminal.
4.7
MDB status LED
The terminal does have a MDB status LED on the back
which shows status in active state.
Description
State
Idle state, ready to use
green
Out of order
red
Make your choice and/or present your card for
payment or revalue.
yellow flashing
Transaction in progress
yellow
Transaction successful, vend in progress or revalue
aproved
green flashing
Transaction denied follow display indication
red flashing
