-
Unit 3 Scala Court; Leeds; LS10 1JD
Telephone
: 0845 5055 999
Facsimile
: 0845 3701 777
The VT1 allows for connecting the Video signal to an RG59 plug, however this can obstruct the cover without
an elbow joint. You can connect the video using the Vid + and Gnd Vid/Aud on the connector block.
This RG59 can be used to connect a test monitor on the receiver module. If you connect a test monitor to the
RG59 on the transmitter module however (only on the VT1), the video will appear distorted as it is designed as
an input.
VIDEO SENDER/RECEIVER DESCRIPTION
The receiver unit is the unit with the large square antennae. The antennae side of the transmitter is the metal
plate, not the plastic cover side.
ASSEMBLY
The mounting brackets are designed for pole mounting.
Screw the mounting brackets to the base of each device.
Using the clamp, attach the device to a sturdy pole with the antennae pointed towards each other
The angle of deviation of the transmitter can only be up to 13°
The receiver can have an angle of deviation up to 30° from the transmitter.
The square antennae and the metal plate need to point towards each other.
Note the polarity labels on the devices, both polarities must be the same way
Mount the Transmitter and receiver in clear line of site.
Connect the signal and power cables according to the connection details
Apply power and they will begin to transmit and receive the signal
This completes the Setup of your Transmitter and receiver device.
DISPOSAL
This product is covered by the ROHS 2002/96/EC European Directive.
All Electric and electronic products shall be disposed separately from municipal waste, using the dedicated
locations for these purposes, advised by the government or local authorities.
Proper disposal of old equipment will help in preventing negative effects to health and the environment.
For more information on the proper disposal of old equipment, contact the appropriate local authority or
organization dealing with waste disposal. Alternatively contact the original supplier of the equipment.
2002/95/EC
Non Recycleable
VT Receiver
VT Transmitter
Plastic cover
Antennae
Antennae
Plastic cover