Page 73
Connect a network cable from a PoE switch to the IP tester ‘s PSE IN port. Connect an IP camera or
other PoE using node to IP tester’s LAN port, the PoE voltage and the cable’s pin connection status
show on the screen.
Note:This test if for measuring the voltage being drawn by the PoE node and the IP tester must be
between the PoE switch and the PoE node for this test to work.
Note: The PoE switch must be connected to the PSE IN port. The powered device such as IP camera
or other PoE node must be connected to the LAN port.
Note: Do not connect PoE power supply equipment (such as a PoE switch) to the tester’s UTP/SCAN
port; otherwise it will damage the tester.
3.3.22 TDR cable test
（
* Optional
）
Note:The testing cable can’t be connected to any equipment, otherwise it will damage the
tester!
Connect Alligator clip cable to the TDR port, and the cable must connect well before testing, or it will
influence the accuracy. Click to enter, and click “Start” to test
Built-in BNC cable, network cable, RVV control cable, Telephone line and TVVB cable etc can test. 11
Содержание MON-4HD
Страница 17: ...Page 15 2 5 Function interface...