6
HDMI IN
HDMI input port, connect to HDMI source device with an HDMI cable.
IR OUT
Connect to the IR repeater cable.
5.2 Receiver Panel (decoder)
Name
Function description
POWER LED
When the decoder is powered on, the red LED will be on.
LINK LED
(Green)
■
Flicker slowly: The encoder and decoder have not been paired.
■
Flicker quickly: The encoder and decoder are paired successfully.
RESET button
■
Press quickly the button to copy the EDID of display device
to source device.
■
Press the button for 3 seconds to reset the decoder to factory
default status.
AC/220V
Connect to 100~240V AC 50/60Hz power cable.
HDMI OUT
HDMI output port, connect to HDMI display device with an HDMI cable.
IR IN
IR input port for receiving the signal of IR remote.
