model no. 040-1192-0
KEY P
AR
TS/LISTE DE PIECES
INSTRUCTIONS/INSTRUCTIONS
ASSEMBL
Y
1
C
Remove the safety clip (1) from the rack arm (C).
3
ASSEMBL
Y
J
H
K
J
I
G
1
Insert bolt (G) into the aligned holes and secure
using a flat washer (I), spring washer (H) and
nylon lock nut (K). Tighten
the nut using
3/4" (19 mm) wrench (not included).
5
6
Note:
Use protective caps (J) to cover the bolt
head and nut
.
Align holes at the
upper part of the centre mast (B)
with the corresponding holes on the
rack arm (C).
4
C
B
Replace the safety clip (1).
6
7
M
3
4
Fit one end of the cradle strap (M) onto all eight
cradles (3) of the rack arm
. Fit the remaining
four cradle straps to one side of each anti-sway
cage (4).
Note:
Ensure that the cradle strap is fitted on the
single peg side of the cradle.
7
This bike carrier can be fitted to vehicles
equipped with a 1 1/4" (3.2 cm) or 2" (5 cm)
hitch receiver
.
• Follow steps 9 and 10 for fitting the bike
carrier to a
2" (5 cm) hitch receiver.
• Follow steps 11 to 13
for fitting the bike
carrier to a
1 1/4" (3.2 cm) hitch receiver.
KEY P
AR
TS/LISTE DE PIECES
INSTRUCTIONS/INSTRUCTIONS ASSEMBL
Y
Note:
Ensure the rack arms are in the opposite
direction of the stinger
.
8