CCL COX-16120S, Руководство по эксплуатации и программированию

Страница: 10 / 18

.
Denied Table
– A
.
Numbers to be disallowed to extensions whose L = 4, are to be defined in this table.
For value of L refer “Junction Dialing
Controls”.
This table has 16 Locations.
Procedure
: Dial #

0000 + 41 QQ ABCD#
Where QQ= 01 to 16 (16 Locations of the Table)
ABCD= The starting 4 digits of the Tel numbers to be denied to extension.
For less than 4 digits, dial # at the end of digits.
To clear this Table: Dial #

0000 + 41 #
To clear a particular location of this table: Dial #

0000 + 41 QQ #
.
Denied Table
– B
.
Numbers to be disallowed to extensions whose L = 5, are to be defined in this table.
For value of L refer “Junction Dialing
Controls”.
This table has 16 Locations.
Procedure
: Dial #

0000 + 42 QQ ABCD#
Where QQ= 01 to 16 (16 Locations of the Table)
ABCD= The starting 4 digits of the Tel numbers to be denied to extension.
For less than 4 digits, dial # at the end of digits.
To clear this Table: Dial #

0000 + 42 #
To clear a particular location of this table: Dial #

0000 + 42 QQ #
.
Do Not Disturb (DND)
.
In DND mode, no one can call the DND extension
PROCEDURE: Dial # 83
To cancel DND, simply lift Handset.
.
Door Phone
.
Upto 2 Door Phones can be connected to the PBX.
Open the back cover of the Door Phone and connect 2 wires on the Terminal block.
These 2 wires are to be connected to any of the Extension port of the PBX.
To define the Extension as the first Door Phone extension, program as below
:
Dial #

0000 + 80 NN 1 #
Where, NN= 01
– 16 (Representing the Extension numbers from 6001 to 6016)
To define the Extension as the second Door Phone extension, program as below :
Dial #

0000 + 80 NN 2 #
Where, NN= 01
– 16 (Representing the Extension numbers from 6001 to 6016)
To define the Extension as the 3rd Door Phone extension, program as below :
Dial #

0000 + 80 NN 3 #
Where, NN= 01
– 16 (Representing the Extension numbers from 6001 to 6016)
To define the Extension as the 4th Door Phone extension, program as below :
Dial #

0000 + 80 NN 4 #
Where, NN= 01
– 16 (Representing the Extension numbers from 6001 to 6016)
To make all Door Phone extensions as normal Extensions, program as below :
Dial #

0000 + 8000 #
To make a particular Door Phone extension of 1st Door Phone, as a normal Extension, program as below :
Dial #

0000 + 80 NN 1 # Where, NN = 01 to 16.
To make a particular Door Phone extension of 2nd Door Phone, as a normal Extension, program as below :
Dial #

0000 + 80 NN 2 # Where, NN = 01 to 16.
To make a particular Door Phone extension of 3rd Door Phone, as a normal Extension, program as below :
Dial #

0000 + 80 NN 3 # Where, NN = 01 to 16.
To make a particular Door Phone extension of 4th Door Phone, as a normal Extension, program as below :
Dial #

0000 + 80 NN 4 # Where, NN = 01 to 16.
Door Phone ring assignment
Day Mode:
Dial #

0000 + 82 N # - To assign extensions to ring when Door Phone calls, in Day Mode.
Where, N= 1
– 8 (Representing the Extension numbers from 6001 to 608)
Repeat the program for up to 8 Extensions maximum.
Dial #

0000 + 82 # - To clear all programmed extensions for Door Phone calls, Day Mode.
Night Mode:
Dial #

0000 + 83 N # - To assign extensions to ring when Door Phone calls, in Night Mode.
Where, N= 1
– 8 (Representing the Extension numbers from 6001 to 608)
Repeat the program for up to 8 Extensions maximum.
Dial #

0000 + 83 # - To clear all programmed extensions for Door Phone calls, Night Mode.