15
TREND INDICATOR
The trend indicator shows the temperature or humidity trends of
changes based on later 15 minutes.
Rising
Steady
Falling
MAX / MIN DATA RECORD
The console can record MAX / MIN
readings both daily and since last
reset.
Daily MAX
reading
Daily MIN
reading
MAX reading
since last
reset
MIN reading
since last
reset
TO VIEW MAX / MIN
1. In normal mode, press
[ MAX / MIN ]
key on the front side, to check the daily MAX records
of current channel and indoor.
2. Press
[ MAX / MIN ]
key again to check the daily MIN records of current channel and indoor.
3. Press
[ MAX / MIN ]
key again to check the accumulative
MAX records.
4. Press
[ MAX / MIN ]
key again to check the accumulative MIN records.
5. Press
[ MAX / MIN ]
key again and back to normal mode.
6.
User can also check records of different sensor by pressing
[ CHANNEL ]
key.
TO RESET THE MAX/MIN RECORDS
Press and hold
[ MAX / MIN ]
key for 2 seconds to reset the current on display MAX or MIN
records.
NOTE:
The LCD will also display the "
" / "
"icon, when showing the record(s).
CALIBRATION
To calibrate the temperature and humidity:
1. In normal mode, press and hold
[
/ CAL ]
key for 2 seconds to enter the calibration mode
as below.
2. Press
[ +
]
or
[ - ]
key
to select IN or any Channels.
3. Press
[ MODE / ALARM ]
key to select between: Temperature
Humidity.
4. While temperature or humidity is blinking, press
[ +
]
or
[ - ]
key to adjust the offset value.
5.
When finished, press
[ MODE / ALARM ]
to proceed with next calibration by repeating
process 2 - 4 above.
6. Press
[
/ CAL ]
key to return to normal mode.
BACK LIGHT
The main unit back light can be adjusted, using the
[ HI / LO ]
sliding switch to select the
appropriate brightness:
- Slide to the
[ HI ]
position for the brighter back light.
- Slide to the
[ LO ]
position for the dimmer back light.
