IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User
Manual
48
Default: Local Contact.
Net Contact: I/O out is controlled by the surveillance management software.
Note
: This function needs to be supported by digital video surveillance
management software like HCMS. If Net Contact is selected, users have to set
Alarm Server IP the same as the IP address of HCMS server. After related
setting to HCMS finished, users can remotely control the relay via HCMS
software. For detailed information, please refer to HCMS manual.
Alarm Server IP: used to set the IP address of alarm server. If alarm occurs, it
will inform the alarm server.
Alarm out Relate
Users can set the relevant alarm response ways for I/O alarm in, motion
detection alarm, Alarm output 1 (if Net Contact is selected, Alarm output 1 on
the web page is unavailable), SD card, Mail, FTP or Audio. After setting
completed, click “Save” button to take effect.
Note: when “FTP” or “Mail” is selected, you need to set FTP or SMTP
parameters in Network Settings, refer to Section 4.3.2 or Section 4.3.3 for
details.
Alarm Schedule
IP camera can set the effective alarm schedule. Select the alarm period (if
Sunday is selected, alarm will be enabled during the set period of each Sunday;
if everyday is selected, alarm will be enabled during the set period of everyday),
and then, set the time period. Enter the start time and end time in the 24-hour
format. The end time must be larger than the start time.
