CC&C 1T1R Скачать руководство пользователя страница 22

18

   

cracked in a couple of hours with off-the-shelf tools. 

Wireless LAN (WLAN)

 

A wireless LAN does not use cable to transmit signals, but rather uses 

radio or infrared to transmit packets through the air. Radio Frequency 

(RF) and infrared are the commonly used types of wireless transmission. 

Most wireless LANs use spread spectrum technology. It offers limited 

bandwidth, usually under 11Mbps, and users share the bandwidth with 

other devices in the spectrum; however, users can operate a spread 

spectrum device without licensing from the Federal Communications 

Commission (FCC). 

 

 

Fragment Threshold

 

The proposed protocol uses the frame fragmentation mechanism defined in 

IEEE 802.11 to achieve parallel transmissions. A large data frame is 

fragmented into several fragments each of size equal to fragment threshold. 

By tuning the fragment threshold value, we can get varying fragment sizes.              

The determination of an efficient fragment threshold is an important issue in                  

this scheme. If the fragment threshold is small, the overlap part of the master 

and parallel transmissions is large. This means the spatial reuse ratio of 

parallel transmissions is high. In contrast, with a large fragment threshold, the 

overlap is small and the spatial reuse ratio is low. However high fragment 

threshold leads to low fragment overhead. Hence there is a trade-off between 

spatial re-use and fragment overhead. 

Fragment threshold is the maximum packet size used for fragmentation. 

Packets larger than the size programmed in this field will be fragmented If you 

find that your corrupted packets or asymmetric packet reception (all send 

packets, for example). You may want to try lowering your fragmentation 

threshold. This will cause packets to be broken into smaller fragments. These 

small fragments, if corrupted, can be resent faster than a larger fragment. 

Fragmentation increases overhead, so you'll want to keep this value as close 

to the maximum value as possible. 

 

 

RTS (Request To Send) Threshold

 

The RTS threshold is the packet size at which packet transmission is governed 

by the RTS/CTS transaction. The IEEE 802.11-1997 standard allows for short 

packets to be transmitted without RTS/CTS transactions. Each station can 

have a different RTS threshold. RTS/CTS is used when the data packet size 

exceeds the defined RTS threshold. With the CSMA/CA transmission 

Содержание 1T1R

























Отзывы: