CBSArcSafe.com
|
Email: [email protected]
CBS
Safe
®
A Group CBS Company
Arc
User’s Manual for the following RSK models:
RSK-ABL1-C and RSK-ABL1-W
• 1.0 Introduction
• 2.0 General Safety Information
2.1 Arc-Blast Hazards
2.2 Battery Hazards
2.3 Magnet Hazards
2.4 Pinch Point Hazards
2.5 Radio Frequency
• 3.0 Battery Information
3.1 Removing and Replacing the Battery in the RSK-ABL1 Actuator
3.2 Replacing the Battery in the RTL-1 Remote Transmitte
• 4.0 Operation
4.1 Installing the RSK-ABL1
4.2 Operating the RSK-ABL1
4.3 Removing the RSK-ABL1
• 5.0 Storage
• 6.0 Troubleshooting
• 7.0 Specifications
• 8.0 Contacting the Manufacturer
1.0 Introduction
The RSK-ABL1 is designed to remotely operate the ON/OFF handle on Allen Bradley motor control center units with 30, 60,
and 100 amp ratings. It is not designed for other manufacturer’s motor control centers or for units with other amp ratings.
The RSK-ABL1 is offered in two basic models – a wireless version (RSK-ABL1-W) and a cabled version (RSK-ABL1-C).
The advantage of the wireless version is that there are no cables to deal with which makes it more convenient
to use. The cabled version is offered because some customers prefer cable operated equipment.
The following items should be included in with your RSK-ABL1:
RSK-ABL1-W
RSK-ABL1-C
Actuator with battery pre-installed
Actuator with battery pre-installed
RTL-1 Handheld transmitter with battery pre-installed
RCL-1 Handheld controller
Instruction Manual
30-foot cable (50-foot optional)
Carrying case
Instruction Manual Carrying Case
