CBS ArcSafe RSA-184D, Инструкция по установке и эксплуатации

Страница: 5 / 12

RSA-184D
Installation and Operation
5
2 Operation
A
TTENTION
!
Please ensure that all cables are clear of moving parts. Failure to do so may result in damage
to cables and/or actuator.
A
TTENTION
!
Please ensure that the batteries to the RSO-I AR are fully charged or that the unit is plugged
into AC power.
For detailed instructions on the operation of the RSO-I AR please see the RSO-I AR Manual.
1. Ensure that the RSA is properly installed. See
the Installation section for detailed instruc-
tions.
2. Plug the RSO-I AR into the motor control box.
3. Exit the arc flash boundary
4. Turn the power switch on the RSO-I AR to the
ON position.
5. Ensure that the Auto Retract (AR) function is
set according to the placard on the RSA. If not
specified, leave AR turned OFF.
6. Press and hold CLOSE to turn ON the breaker.
7. Press and hold TRIP to turn OFF the breaker.