RSA-138 Installation and Operation Manual
2
© 2010 CBS ArcSafe
®
2010-03-23
1.0 Installation
DANGER!
Ensure that the switch to be serviced matches the switch shown on cover. If the switch to be
serviced does not match, please call CBS ArcSafe® for more information regarding remote
switching applications for your particular model.
1.
Remove the bolt located above the switch and replace it with the
provided threaded stud as shown in the following pictures.
Tighten stud and ensure that the through hole in the stud is
vertically aligned.
2.
Remove the cover that houses the stock tooling by removing the
two bolts that hold it in place. Remove the original tooling as well
and set aside with cover.
Replace bolt with
stud as shown
Switch before tooling removal
Switch after tooling removal
