WHAT TO DO IN CASE OF ALARM
> identify and eliminate the cause of the alarm.
> extinguish all open flames and turn off the gas ap-
pliances.
> immediately ensure abundant ventilation of the
room.
> stop the gas supply from the tank (general valve).
If you smell gas or there is an alarm:
> absolutely no electrical appliance must be
switched on!
> if the cause of the alarm is not identifiable, leave
the room and notify the emergency service.
DETECTOR TEST
It is recommended to test the detector once a month
to check that the alarms are working properly. To
perform the test, switch the detector off and on again.
When it is turned on, LEDs
and
remain on for 1 second and the buzzer makes a short
sound.
" ef. 2"
" ef. "
R
R
3
MAINTENANCE
> to
it
d
clean
with a damp cloth o not use any
detergent.
> to regularly clean the detector to avoid the deposit
of dust that could obstruct the sensor grids.
> to test it at least once a month.
To keep the detector in good condition, it is necessary:
DETECTOR MALFUNCTION
In case of malfunction of the electronics or sensor, the
device signals the “error” status with the red LED
" ef. "
R
3 turning on.
Replace the device.
!
EN
12
WARNING
Do not use the following substances in the immediate
vicinity of the device: alcohol, benzene, solvents,
thinners, adhesives, colours and silicone products,
cleaning detergents, perfumes, sprays in general, etc.
!
Содержание BMTG
Страница 2: ......
