CBE 230, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 115

230 Series Auger Packer
6 OF 115
WARNINGS
The purpose of this section is to alert operating and maintenance personnel to the possible dangers of
this type of equipment. Serious injury and/or equipment damage could result from not heeding these
safety precautions.
BEFORE OPERATING EQUIPMENT:
Any personnel working directly with or on this equipment should read this manual before proceeding
with equipment use.
Electricians should familiarize themselves with the electrical drawings before initial start-up of
equipment.
Other appropriate operating and maintenance personnel should familiarize themselves with mechanical
layout and general arrangement drawings before setting up and doing start-up on equipment.
Determine location of all emergency switches.
Be sure all guards are in place and observe all warning signs.
Be sure electrical equipment is free of any accumulation of water.
Be sure all personnel are clear of operating mechanisms before connecting air line.
Never start equipment without first checking for loose objects, tools and trash. All persons in the
immediate area of the equipment should be alerted prior to starting.
WHEN OPERATING EQUIPMENT:
Observe extreme caution when switches are turned on. On some equipment, the operation may begin
automatically after a time delay.
Do not open junction boxes or control panels unless you are a qualified electrician. Be sure power is off.
Except when electricians are performing maintenance, electrical enclosures and junction boxes should
always be securely closed.
Stop machine and disconnect power before servicing or repairing. Follow all LOCK OUT / TAG OUT
PROCEDURES when performing maintenance and adjustments on this equipment. A disconnect is
provided that has a place for LOCKOUT.