OPERATING THE WASHER
Position the washer at a convenient place within your work area, ideally in an airy room or
outside where you can easily start the machine and connect hoses etc. If there is not enough
air, a malfunction or an overheating may occur.
Now you can follow these simple step-by-step instructions:
1.
Check fuel tank level and top up as necessary. Ensure that the cap is fully and tightly
on. Lower suction hose into water tank
2.
Make sure the throttle is fully open, adjust choke to suit startup
3.
Pull the pull cord to start the engine / turn key
4.
When the engine is running you can hold handgun in open position to begin sucking
water into pump
5.
Do not point water jet at or near humans/animals, injury may occur
6.
When finished the job turn the key to the off position and release pressure in hose by
pulling trigger
TROUBLESHOOTING F, A, Q,
If for some reason you discover that the machine is not working, follow these hints before
requesting the help of a qualified engineer.
•
Check that the fuel tank has the appropriate amount of fuel in it.
•
Check the air box is not being restricted in anyway.
•
If you think the battery is flat try using the recoil start instead.
•
Check y-strainer and suction filter are not blocked.
•
Ensure the suction hose is fully submerged in water and has ample supply
•
Leave for 30 minutes as the temperature safety switch may have triggered and it will
need time to cool down. Move to cooler location to get more ventilation.
If after the procedures have been carried out and the machine still does not function, please
contact our service department.
.
