G
G
Speed Dome Camera Instruction Manual
36/48
Alarm Input Setup
ALARM INPUT SETUP
------------------------
ALARM NO. 1
TYPE N.OPEN
ACTION NOT USED
HOLD TIME ENDLESS
POST ACTION HOME
BACK
EXIT
Defines Alarm Function. When an alarm is receive, an
input signal to the camera triggers the user-defined action
programmed for the alarm.
z
Alarm No
[1~3]
Selects a sensor number to set up.
z
Type
[Normal OPEN/Normal CLOSE]
Selects sensor operation type.
z
Action
[NOT
USED/PRESET/PATTERN/SWING/GROUP]
Selects an action to run when a sensor
signal is input.
z
Hold Time
[ENDLESS / 1~59 SEC. / 1~180 MIN.]
Sets the time period for the action which is
run by external sensor activation. After the
time period passes, the action pre-defined
in
Post Action
runs sequentially in
succession to the action by external sensor
activation. If this option is set to
ENDLESS
,
Post Action
does not
activate.
z
Post Action [HOME/PRESET/PATTERN/SWING/GROUP
/PREV ACTION]
Selects the action that a camera will run
after the time period in
HOLD TIME
passes. If Post Action is set to
PREV.
ACTION
, the camera runs the previous
action which it ran most recently.
OSD MENU
4
