Made in Vietnam - r04
Page 4 of 4
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
facet
BOOKCASE
For added safety and stability, it is recommended that the wall mounting
hardware be installed. For safe mounting, it is essential to use wall anchors
appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to
wood studs whenever possible.
A) Attach 2
mounting brackets
to top of unit using 1
small screw
per
bracket.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below each mounting brackets mounted to the back of the
unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the
wall that is slightly smaller in diameter than the anchor. Gently tap the
plastic
anchor
until the flange of the anchor is flush with the wall.
D) Attach the
mounting brackets
to the wall by inserting 1
large screw
through each mounting bracket and into the wall anchor in the wall.
E) Position the unit so the mounting bracket on the back edge is allowed with
the wall bracket.
F) Lace one end of each
wall strap
through corresponding brackets, and into
the other end of the strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
NOTE:
If you are unsure about your wall
type or what mounting method
you should use, consult a
qualified professional or your
local hardware store.
WALL
A
C
D
NOTE: Bookcae case be
wall mounted from either side
