A
C
D
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified
professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood
studs whenever possible.
A) Attach 2
mounting brackets
to top of unit using 2
small screws
per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below each mounting bracket on
the back of the unit.
C) Drill a hole in the wall stud. If a wall stud is not available, drill a hole in the wall that is slightly smaller in diameter
than the anchor. Gently tap the
plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach the
mounting brackets
to the wall by inserting 2
large screws
through each mounting bracket and into
the wall anchor in the wall.
E) Position the unit so the mounting brackets on the back of the unit are aligned with the wall brackets.
F) Lace one end of each
wall strap
through corresponding brackets, and into the other end of the strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
optional wall mounting assembly
WALL
F
a symmetric
CLOSET
Made in Vietnam - r06
Page 5 of 5
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
