CB ELECTRONICS TMC-1, Руководство по установке

Страница: 8 / 14

8
Setting up the system
To set the TMC-1 operation mode
1.
Press the [Page] and [Select] keys simultaneously to display the Select Page.
2.
Press User Key 8 "Setup" to display the Setup Menu.
3.
While holding down the [Select] key, press User key 4 "→" to display the Adv Menu
24 - MMP1 Device Emulation page.
4.
Use the User Keys 3 "↑" and 7 "↓" to select the "MMP1 Compliant" mode.
To connect TMC-1 to MMP1
If you want to connect the TMC-1 to the MMP1 using IP addresses other than Auto IP, see "To
set IP addresses" on page 9 to set the IP addresses according to your system before
connecting them.
1.
Press the [Page] and [Select] keys simultaneously to display the Select Page.
2.
Press User Key 6 "E-Net" to display the Discovery page.
All the devices in the same network will be shown on the Discovery page. If no devices are
detected, press User Key 5 "Re-Scan" to start the detection again.