Cayken KCY-35QE, Руководство по эксплуатации

Страница: 7 / 12

9
10
MACHINE MODEL PARAMETER LIST
ADVANTAGES OF AUTOMATIC MAGNETIC DRILL
KCY-35QE KCY-5
0
/2QE KCY-80/3QE
35
5
0
80
16000 16500 17600
110/220~ 110/220~ 110/220~
14
20.5
15.3
1600
1700 2690
Core drill dia
Rate voltage
Rate input power
Max attraction
No-load speed
Net weight
Net weight
Package size
rpm
Kg
Kg
cm
N
W
V
mm
Specifications
State: Cause by fixing not firm or not proper security measures for accident , our
company does not undertake any responsibility.
Attention:To improve product constantly, our reservation does not need the power
of informing in advance for technical data change.
1.In automatic mode ,install the appropriate annular cutter, and start the
machine, it will automatic feeding and automatic return back .
2.one operator can operate several machines , this greatly improves work
efficiency.
3.In automatic mode, the feeding speed is constant, which will protect the
annular cutter and extend the service life of the annular cutter.
Shift when the machine stops or will stop .
Shift in place . If the spindle doesn’t rotate or there is some noise after
starting up , the gear may not shift in place . Turn off the machine im
mediately , and then shift the gear to proper place , rotate the spindle
back and forth ( easy to shift ) at the same time till shift in place
Do not shift when the machine is full - speed operated , over load or stuck .
Position Descript
H L
M
IMAGE 2 IMAGE 1
1 ，
Low-speed
, High
-speed
,
middling speed
(
3 files types )
， graphic L- H- M-
representation is the files of low speed ，
Turn the knob clockwise if turn form low speed to high speed.
otherwise counter-clockwise.
-- Low-speed May replace tapping for more hard material or big bit to use .
The bit for more soft material or little support ( cutting tool ) --High-speed
L --
Low speed
May replace tapping for more hard material or big bit( cutting tool) to use
middling speed
The fried dough twist for suitable size gets into , hollow get into M --
The bit for more soft material or little support ( cutting tool ) H-- High speed
IMAGE 1
IMAGE 2
1 ， Low-speed , High -speed ， Graphic representation is low speed,
Turn the knob clockwise if turn form low speed to high speed.
otherwise counter-clockwise.
4.All the automatic models are with oil bath motor , the gear oil in oil-bath
motor has good extreme pressure, when gear-occlude , the temperature of
the friction surface is high enough, a chemical reaction occurs on the surface
of the gear. And the surface of the gear will formed metal film. That will
prevent the gear from wearing out and extend the service life of the gear.
Automatic magnetic can be operated both manual and automatic
810
35*25*43 35*25*43 35*26*45
280/510
22.8
130/300/620
16.6
27