Please follow the instruction in the manual in order to keep the amplifier work in its best state. If wrongly
operated and you thought that would be troubles please check according to following tip to look for the exact
reason.
NOTE:
is the registered trademark of Zhuhai Spark Electronic Equipment Co., Ltd.
Troubleshooting
Problem
Cause
Remedy
NO OUTPUT
Power
is OFF.
Indicator
Power
is ON.
Indicator
Noise output
Sound field Positioning
is not so good.
Power cord is not well-connected.
Main fuse is out.
Troubles of inner parts or components.
Volume is at ZERO.
NO signal input.
Ground of input signal cable is open
or bad contact of the input signal
cable.
Components or circuits are in trouble.
Signal input cables or speaker
cables are wrongly connected.
Check power cable connection
or power outlet connection
Replace with the same type
and value fuse.
Please contact with local
agents or our company.
Turn up the Volume.
Check the function of the
sound source.
Check the input selection and
switch to the proper input.
Replace the input signal
cable with a new one.
Please contact with local
agents or our company.
Reconnect it as suggested in
the manual.
Malfunction of Remote
Control.
Be disturbed.
Low Battery.
Obstacles between the amplifier and
remote.
Keep away from the source of
disturbance. Turn off and restore.
Replace with new batteries.
Remove the obstacles.
14
