Read the Manual
——
Please read the user's manual carefully before installation and operation.
Keep the Manual
——
Please keep the manual for future reference.
Warning Signs
——
Don't tear off or rub off the serial number.
Operation
——
Do the operations as you are instructed in the Manual.
Parts
——
If you are going to use parts not supplied by our company like power cord, fuses etc please make sure that parts
you used are compatible with the safety requirements. Or it will cause fire or electric shock.
Placement
——
Put the amplifier on a level place. Make sure that it doesn't bring damage to the children, adults and the
amplifier itself.
Power
——
Please make sure the local voltage is the same level as indicated on the rear panel.
Overload
——
If the power socket is overloaded with other equipment, it will cause fire or electric shock.
Warranty Service
——
Do not open the product and change the components inside yourself. Opening the cover may expose
you to dangerous voltage or other hazards. The warranty doesn't extend to any product that has been
opened by you without permission of our company.
Troubleshooting
——
If you encounter any abnormal behavior during setup or playback, please refer to the advice in next
pages of this manual to recover your amplifier back to normal operation. If you fail to rectify the
problems after that, please contact your authorized dealer for technical support.
Small Tips
Turning On
Before turning on the amplifier please make sure all connections are right and power supply is stable.
Turn on the amplifier, the power indicator will be on and the working indicator will keep flickering.
The working indicator will be on after 60 seconds. It means that the amplifier is working normally. If the working
indicator is off, please turn off the power and contact with our local agent or our company.
Select the right audio source channel, adjust the volume to a certain position and then you can enjoy the music you
prefer.
NOTE
：
1. When the audio system is under working state, don't unplug the signal cable or speaker cables, or it will cause
damage to the amplifier and other equipments.
2. It should at least takes 2 minutes before you turn on the power again, or it will cause damage to the vacuum tubes.
◆
◆
◆
1. The Product is warranted for a period of twelve (12) months from the date of original purchase (the “Warranty Period”).
Replacement Products are warranted for the remainder of the original twelve (12) month warranty period. Six-month
warranty on stock vacuum tubes.
2. The defective product must be returned to your dealer or our company for repairing when your dealer or our company
accepts your requirement.
3. The warranty doesn't extend to any product that has been opened by you without permission of our company.
The information in this manual is subject to change without further notice.
NOTE
：
Warranty Service
11