3
Ⅴ
CONNECTION DIAGRAM
1. Connect to computer
Connect the USB port to the computer’s USB port with the USB cable which
must be according to the USB2.0 specification. Only the USB port in the rear panel
can be used for desktop computer.
2. Connect to DAC
Connect the COAXIAL output to the COAXIAL input of the DAC with the
coaxial cable. Or you can connect the OPTICAL output to the OPTICAL input of the
DAC with optical cable
.
3. Connect to power amplifier
Connect the analog output terminal to the analog input terminal of the power
amplifier with audio cable.
Note:
Be sure to use at rated voltage. Please check whether the rated voltage marking
on the rear panel corresponds to your line voltage. If not, please contact your dealer.
CAUTION:
Please shut down the power before connections in case of noise and
damage to the unit. You need to wait for about 35 seconds after you turn on the unit
every once, because
the vacuum tube needs to be preheated.
Left speakers
Right speakers
