Cayin CS-300A Скачать руководство пользователя страница 15

14

 

    

 

 

 

 

Turn on the amplifier, the power indicator will be on and 

the working indicator will keep flickering.

The  working  indicator  will  be  on  after  30  seconds.  It 

means  that  the  amplifier  is  working  normally.  If  the 
working  indicator  is  off,  please  turn  off  the  power  and 
contact with our local agent or our company.

Select the right audio source channel, adjust the volume 

to  a  certain  position  and  then  you  can  enjoy  themusic 
you prefer.

 

Turning On

Before turning on the amplifier please make sure all connections are right and power supply is stable.

1.  When  the  audio  system  is  under  working  state,  don't 

unplug  the  signal  cable  or  speaker  cables,  or  it  will 
cause damage to the amplifier and other equipments.

2. It should at least takes 2 minutes before you turn on the 

power  again,  or  it  will  cause  damage  to  the  vacuum 
tubes.

NOTE:

Read the Manual

—— 

Please read the user's manual carefully before installation and operation.

Keep the Manual

——

Please keep the manual for future reference.

Warning Signs

——

Don't tear off or rub off the serial number.

Operation

——

Do the operations as you are instructed in the Manual.

Parts

——

 If you are going to use parts not supplied by our company like power cord, fuses etc please  

make sure that parts you used are compatible with the safety requirements. Or it will cause fire or electric 

shock. 

Placement

——

Put the amplifier on a level place. Make sure that it doesn't bring damage to the children, 

adults and the amplifier itself.

Power

——

Please make sure the local voltage is the same level as indicated on the rear panel.

Overload

——

If the power socket is overloaded with other equipment, it will cause fire or electric shock.

Warranty Service

——

Do not open the product and change the components inside  yourself. Opening 

the cover may expose you to dangerous voltage or other hazards. The warranty doesn't extend to any 

product that has been opened by you without permission of our company.

Troubleshooting

——

If any problems when you are using the product, please check according to 

following tips to look for the exact reason. Please contact with our company if you can't solve the 

problem.

S m a l l  T i p s

Содержание CS-300A

















Отзывы: