11.3 Delete Preset Program (Computer Software Control)
11.4 Preset date on the computer (Computer Software Control)
11.5 Import data from the computer to processor (Computer Software Control)
Connect to the computer, open the software, set the program in "Reboot Effect" from "Device Setting"
(Program 1-4; Last program status before turn off).
The default program will be one of 1-4 whether or not making any parameter
adjustment before reboot. This feature is to prevent extra work loaded applied to the
Musical Technicians
Default program remains the same to prevent sudden power lost
Programs(memories)
1
-
4
Last program
Set through the online software interface with the computer: "Device Settings"
Maximum volume of the music: Mute,-30db ~ 0db, Stepping: 0.5db
Maximum volume of the microphone: Mute,-25db ~ +6 db, Stepping: 0.5db
Maximum volume of effect: mute,-30db ~ 0db, Stepping: 0.5db
Maximum volume of center: mute,-30db to 0db stepper: 0.5db
Maximum volume of subwoofer: Mute,-30db ~ 0db, Stepping: 0.5db
The maximum gain of music equalizer : +6.0 db to +12.0 db, Stepping: 0.1db
Volume Limit Feature:
To protect and prevent speakers and amplifier from damaging at a certain range.
To avoid setting high volume destroy the sound field, for example: When the microphone parameter is set
to-10db, then the upper limit value of microphone volume is-10db, when using the microphone volume knob
on the remote control to adjust the microphone volume, maximum output volume is -10db.
Set this function under "Device Settings" in the software provided.
If the Switching Speed of its parameters set to fade during power On/off, Recall program, conversion mode,
the signal line, the signal is from small to large incremental increase; If the parameter set to "immediately",
the signal is changed over directly without fading process.
"
"
22
12. Turn-On to Load the Selected Program
13. Volume, Maximum Gain Limit Function
14. Volume Fader Function