Cavius 2107-001, Руководство пользователя

Страница: 18 / 28

16
7. Test function:
After installation, and at least once per quarter, test all of your alarms to ensure
they are operating correctly and are within range of each other.
It is recommended to check visually every week if the LED flashes correctly
(every 48sec.)
Press the test button on any alarm for at least 6.5 seconds (count 2 sets of
3 sound sweeps). This will send out a test signal from the alarm; all other
connected alarms should receive the signal within a short time. The alarms will
emit a short beep and the LED will flash every 8 seconds for 2 minutes.
You can also conduct the interconnection test through the CAVIUS App
(if you have the GATEWAY HUB and App set up).